Rivman1243

On 2/19/2019 at 12:00 PM, AZIAT said:

Not . You did not understand correctly.

You need to replace the output shaft in the A650E. Or make a transition shaft between the A650E and HF2A

Make an adapter between the gearbox and transfer case something like this 

Buy or manufacture an electronic control unit for the A650E. 

 

 

Does that have to correct output shaft for the HF2A? How did that person control the shifting? 

The bellhousings have the same bolt pattern 

55 minutes ago, AZIAT said:

No . You did not understand correctly. 

You need to replace the output shaft in the A650E. Or make a transition between the A650E and HF2A

An adapter for Between the Make the the gearbox and transfer a case something like the this 

Thank you for the reply. The A650e bellhousing and torque converter can be swapped for the A343F. I have a 1FZ-FE. The A650E has the 2nd gear one way clutch in the tailhousing. If I could find a bell for my 1FZ-FE that I bolted to the A750F or A760 I would try that. 

1 hour ago, vito7733 said:

Please refer from ATRA.

What is ATRA

I'm doing my best to learn Russian and using a translation program. It's very slow going for me reading this forum. Not all the words translate correctly. If I have read that topic you posted correctly its possible to put all the clutches and gears of a 5 speed into the A343F case?

I've been searching the forum here looking to see if anyone has been able to install a A650E where a A343F was in a FZJ80. I'm interested in installing a 5 speed automatic transmission. Thank you